| HOME
                                                  
Audiophile APS Power Conditioner
Want better sounding CD's, this is a secret for UHA customers only!
Greg has been using this source to buy high quality Japanese CD's for many years.
They come direct to you safe and secure direct from Japan,
and are the cheapest Japanese CD prices anywhere!
Thousands of superior sounding high quality Japanese pressings, check them out!
(May take a minute to open)
Greg's secret Japanese CD source.

Regenerator Models Price (USD)
PurePower™ 500 $1,795.00
PurePower™ 700 $2,195.00
 PurePower™ 1050 $2,495.00


Power Packs add battery back up
for extended use when in a power outage!
PurePower™ APS with Power Packs -
Minimum minutes of full power outage protection.
Model
0 Packs
1 Pack
2 Packs
3 Packs
4 Packs
PurePower™ 500
10
72
156
-
-
PurePower™ 700
5
48
104
-
-
PurePower™ 1050
8
37
70
106
144
Times shown are minimum outage protection at maximum rated power output. Actual durations are
determined by the RMS power draw. 1/2 load = approx. 3x duration, 1/4 load = approx 6x duration.
Model
Use with PurePower
List Price (USD)
Power Pack
500, 700
$795.00
Power Pack Plus
1050
$895.00


Soundstage review excerpt:
July 2004
Audiophile APS PurePower 1050 Power Conditioner
by David Millman

Over the next few weeks, I experimented by pulling components out of the PurePower 1050 one at a time (amp, preamp, whatever) and then plugging said component into the wall. Invariably, every piece of gear suffered in relatively the same way: a loss of bass definition, a loss of overall detail, a loss of clarity and energy. These problems were immediately solved by plugging the given piece back into the PurePower 1050.
At this point, I thought I had a pretty good fix on where this review was going, and if you've read this far, you probably think you've got a handle on it, too. But an interesting thing happened when I unplugged all of my gear from the PurePower 1050: the whole system became less involving, less vibrant, less interesting. The message was obvious. In my attempt to be thorough, I'd missed the big picture: power conditioning impacts the individual components, but it takes the cumulative effect to reach the proverbial "tipping point." All of the little benefits added up to one big improvement.

Read the complete review here!






Features Benefits
True regenerated AC power Total isolation from power disturbances & noise.
Total protection from spikes & surges Pure analog sine wave Perfect AC allows your system to perform
up to spec Powerful integrated battery AC keeps flowing with full protection even
in a blackout.
Protects DLP/LCD lamps
3:1 crest factor delivers peak instantaneous watts of 1500, 2100 and 3150 respectively
No current limiting 500 watt, 700 watt and 1050 watt models,
US or International voltages PurePower for audio systems large, small and
in-between provided for in any locale worldwide
Available in Silver or Black finish,
shelf, vertical, or rack mountable
Can suit most any installation preference
Electrical approval - CE, UL, CSA
Fully complies with electrical codes




Here at Audiophile APS, we believe that the sounds and images that come from your system should be the ones that were introduced intentionally – not those that arrived unintentionally from your utility or through your house wiring.
We believe the music shouldn’t suddenly stop or the screen flicker and dim or a recording operation fail when the utility power has a momentary sag or a short outage.
We believe that power problems such as surges, spikes, transients, and harmonic distortion shouldn’t damage and destroy expensive components catastrophically, or slowly by chronic overheating.
If you have spent time, money and effort to assemble a superior set of components that are capable of delivering a high level of audio and video performance, make sure they are given a source of clean, pure, continuous electrical power to ensure they have a chance to perform to their utmost.

Pure Power In > Pure Sound Out
The PurePower™ APS provides truly regenerated pure power regardless of what problems exist in your utility supply. This is accomplished through our double conversion technology. We convert the incoming power to produce a clean DC current, then recreate a 60 Hz, 120 volt AC wave form from the DC. No spikes, sags, surges or other power disturbances can be passed through from input to output.
Accurate voltage specs
prevent current reduction.
Some products designed to clean or filter the power can reduce the current to your amplifier. The PurePower™ APS maintains a 120 volt output +/- 3% with up to 92% energy efficiency and a power factor of more than .95. All of our APS models can deliver their full rated wattage even during short or long duration power sags. In fact, they deliver continuous full power even if you're getting extended periods of as low as 80 volts at the wall outlet.

Pure Power Continuity
In addition to pure power, the PurePower™ APS provides you with something unique in audio power regenerators - protection against power outage. The PurePower™ APS maintains full wattage output even when the power fails completely. All PurePower™ models give you continued pure power at full output and quality from minutes to hours, depending on your consumption. With the option of adding up to four PurePower™ Power Packs, you can have several hours of full power while your neighbors are in the dark.
Warranty Protection
Our 2 year swap out warranty program is possibly the best in the business. If you are having difficulties with your PurePower™ APS that cannot be resolved by our online or telephone support, an RMA will be issued and a replacement unit will be on its way. Simply swap out the PurePower™ in your system and return the original using the replacement unit's packing materials. Any required documentation and shipping waybills will be included for the return trip.
Models
Watts
Price (USD)
PurePower™ 500
500
$1,795.00
PurePower™ 700
700
$2,195.00
PurePower™ 1050
1050
$2,495.00

Get That "Midnight Sound" 24/7
A recent test report on the PurePower 1050 began by reminding audiophiles that their systems have always sounded their best at midnight. Why? At that hour, the local power utility is delivering its cleanest, most accurate power. At midnight, the current flows and system dynamics can be reached that at other hours of the day are impossible. Until now.

PurePower is the first and only audio power conditioner in the world that takes the inbound AC power from the utility, converts it to DC, then back to perfect voltage sinewave with no noise, distortion, spikes, or sags, even if the inbound voltage is ZERO. Its built-in batteries protect and isolate your system from the local utility in a way that no other conditioner can, giving you that “midnight” sound quality every time you listen, regardless of the time of day.

PurePower's advanced AC\DC\AC conversion technology connects you to a new, stable power source, off the power grid, as though you were hooked up to the cleanest power station in North America. Even if the inbound voltage is zero, PurePower keeps your system operating perfectly with its built-in back-up battery system. Perfect voltage sinewave, total freedom from line noise, distortion, surges, and sags.




REVIEWS!

Audio Video Revolution
February 2005
Review by:
Brian Southard
PurePower™ 1050
"Auditioner beware: after hearing this level of performance improvement, there is no way I can live without Pure Power in my system."
"Clearly the Audiophile APS PurePower 1050 performed better than the Richard Gray 400s on my video projector ... I have come to the conclusion that the PurePower 1050 is the ultimate piece of electronics for video use. Combined with the vast improvements in color and contrast, something that many display devices lack in this day of fixed pixel digital displays, it provides better backup for safeguarding your display by allowing it to properly cool off in the event of a power outage."
"The PurePower 1050’s sonic and video improvements eclipse the impressive feats I remember vividly while evaluating the Exact Power EP15A."
For more details, see the entire Audio Video Revolution review online.

Audiophilia
February 2005
Review by:
Henry Wilkinson
Contributing Reviewer
PurePower™ 1050
"With the Audiophile APS in use, the various rhythms and textures that he used were reproduced with much more clarity. The different types of cymbals used could be heard much more easily. The increase in clarity was not accompanied by any hardness or glare, and that's a good thing. Tonally, music overall from top to bottom seemed richer, more full sounding as compared to the sound using the PS-Audio P-300."
"I am not aware of any other power line regenerator that has all of the capabilities of the APS 1050. Considering price, performance, technology and style, the Audiophile APS PurePower 1050 Power Conditioner receives my highest recommendation."
For more details, see the entire Audiophilia review online.