Want better sounding CD's, this is a secret for UHA customers only!
Greg has been using this source to buy high quality Japanese CD's for many years.
They come direct to you safe and secure direct from Japan,
and are the cheapest Japanese CD prices anywhere!
Thousands of superior sounding high quality Japanese pressings, check them out!
(May take a minute to open)
Complete System Design and installation
CALL OR E-MAIL FOR BEST PRICES!
Fast response to your questions guaranteed!
High End Power Cords
YOU NEED THESE CABLES!
Perfect wave AC-12
Our finest power cable we make. The PerfectWave AC-12 sets a new standard for high-end aftermarket power cables at any price. 8 gauge, PCOCC single crystal, quad shielding, multiple gauge and shaped conductors, solid machined connectors. Perfect AC power is a critical requirement for high-performance audio/video systems. Delivering that power to your equipment, without loss, is the job of the AC power cable. The low noise, high-speed design of the AC-12 is based on 5 patents and years of listening and engineering. The PerfectWave series brings a new level of refined beauty, power and spacious performance to high-end, high-performance systems. It helps connected equipment enjoy a breathtaking openness, with quick transients combined with a warmth and richness that we have never before experienced.
The AC power cable is the method by which we deliver power from the AC source to our equipment. It doesn't do a lot of good to perfect your AC power if you can't deliver that power to your equipment without degradation. Stock AC power cables, included with most manufacturers' equipment, do an adequate job of delivering power, but for most of us "adequate" just isn't acceptable.
To go beyond "acceptable" we need to optimize as many key elements in our equipment chain as possible. Perhaps no other element in the chain plays a bigger role than the equipment's primary energy source; AC power. High-performance audio and video systems depend on perfected AC power, delivered properly, to achieve their highest level of performance.
After a decade of experience designing cutting edge AC power and delivery systems, PS engineering is proud to present our finest achievement in AC power delivery, the PerfectWave AC series. The PerfectWave Series is far more open, spacious and powerful sounding than any power cable we have ever built over the last decade. They are a truly remarkable addition to anyone's high-performance system.
The PerfectWave AC Series consists of 4 models of AC power cables: AC-3, AC-5, AC-10 and AC-12. The series is based on the work of PS Engineering alongside cable design guru Jay Victor, who has been instrumental in developing audio and power cable breakthroughs for the AV industry.
1.5m = $849
The best value in a high-end power cable we make. The PerfectWave AC-5 sets a new standard for aftermarket power cables. 10 gauge, double shielding, multiple gauge and shaped conductors, solid machined connectors. Perfect AC power is a critical requirement for high-performance audio/video systems. Delivering that power to your equipment, without loss, is the job of the AC power cable. The low noise, high-speed design of the AC-5 is based on 5 patents and years of listening and engineering. The PerfectWave series brings a new level of refined beauty, power and spacious performance to high-end, high-performance systems. It helps connected equipment enjoy a breathtaking openness, with quick transients combined with a warmth and richness that we have never before experienced.
Perfect wave AC-3
The PerfectWave AC-3 is the most affordable power cable we make in the series. 12 gauge, OFC pure copper, multiple shields, multiple gauge geometry, machined connectors. The best value in a high-end power cable we make. The PerfectWave AC-3 sets a new standard for affordable aftermarket power cables. 12 gauge, double shielding, multiple gauge and shaped conductors, solid machined connectors. Perfect AC power is a critical requirement for high-performance audio/video systems. Delivering that power to your equipment, without loss, is the job of the AC power cable. The low noise, high-speed design of the AC-3 is based on 5 patents and years of listening and engineering. The PerfectWave series brings a new level of refined beauty, power and spacious performance to high-end, high-performance systems. It helps connected equipment enjoy a breathtaking openness, with quick transients combined with a warmth and richness that we have never before experienced.
6gauge! 1000 strands of copper wire!
AWESOME BIG FAT SHIELDED Cable!
Great for amps!
Don't choke your amp give it the juice!
PS Audio reinvents the power cord - again
Introducing the xStream Power™ series. So
revolutionary, so unique, that we have retired the Lab Cable name in favor of a power cord worthy of the xStream name.
What’s different about the xStream™ Power series? Everything. Literally.
It may sound like a cliché, but in fact we have wiped the proverbial slate clean and started with a fresh design page.
The xStream Power series is perhaps the most exciting, fresh new idea we have come up with since the Labs were first introduced to the world.
From a performance standpoint the new xStreams provide a remarkable improvement over the venerable Lab series and virtually any other after-market power cord we have ever auditioned, regardless of price.
Improvements in openness are simply stunning. The top end of your AV setup will come alive in a way you never thought possible.
The noise floor of your equipment will now be down in the basement which is where (incidentally) you’ll find
the bottom end of your system; on a subterranean level – the slam and impact of the bass will be improved substantially with the addition of a new xStream Power cord.
Understanding What We Have Accomplished
Before we explain all the features and benefits of the new xStream Power™ series it would be helpful if you understood the problems we were working on solving in the older design.
The Lab Cable build took advantage of off-the-shelf materials and construction techniques that were state-of-the-art at the time.
Within a year of the Lab Cable's introduction we began a long and tedious process of re-examining virtually every aspect of its construction and quickly came to a conclusion that had been staring us in the face the whole time; if we continued relying on off-the-shelf materials we would never be able to take the huge leap in performance we were looking to achieve.
To make the huge leap forward with our new delivery system, we would need to redesign every single aspect of the cable, including the connectors, the conductors, the shielding and the jacketing.
PLUS POWER xSTREAM
The Plus has essentially the same construction as the Statement,
but has four 22 gauge solid core conductors and,
along with the bundle of 36 gauge finely stranded OFC,
has a copper gauge equal to 8 gauge per conductor.
The Prelude Power xStream
The Prelude power cord is a more conventional build with no solid core conductors.
Instead, the Prelude has three 10 gauge conductors made of finely stranded OFC,
surrounded by a conductive PVC shield and two more metal shields,
one braided and the other a foil shield and finished with the ferrite impregnated outer jacket.
6' = $331.00
Why You Need the Power Oval
When people design power cords they use massive cable to reduce the noise voltage on the cable. The noise voltage that occurs on the cable is related to L (inductance) and di/dt (the rate of change in the current). You can reduce L by using larger gauge wire but you don't get much bang for your buck because it is a log function. What this means is that as you keep increasing the gauge of the wire you do not get much improvement for your effort. This is why you see people using very heavy and stiff wires in power cords. I have seen some power cords that are so big and stiff that the CD player connected to them is lifted off the ground.
What we have done at Analysis Plus is use computer simulation to optimize the design of a power distribution system. What we discovered is our patented hollow oval design provides a low L cable without having to use stiff and bulky cables. Our cables have a super low noise voltage to reduce the background noise to a minimum. This is extremely important during quite passages, if you want to hear subtle details (this is very important for classical music fans and for other lovers of live music).
The other thing people don't realize about low frequency noise is that the thin aluminum shield found on many power cords does nothing to reduce this problem. The best way to reduce low frequency noise on cables is to reduce loop area. From our computer simulation and measurements we found our patented hollow oval cables does a great job at this. We have the lowest noise voltage we have seen with our hollow oval design.
For higher frequencies our silver-plated copper braided shield does a great job. We used an open braid design that works much like the window on your microwave oven. You can see through the window but the radiation stays where it belongs.
Terminated with WattGate connectors, this power cable is engineered to deliver your audio/video components the clean power they deserve.
Great news! Now you can experience the full potential that has remained untapped in your components that feature detachable power cords. The Chang Lightspeed Power One MKII and Power Zero upgrade power cords are ready to unlock that trapped performance.
The CLS Power One MK II:
Utilizing the CLS MK II isolation module
Ultra low inductance
Ultra high speed
12 gauge solid core construction
This entry level power cord provides excellent value for the price.
The CLS Power Zero:
Utilizing the CLS Reference isolation module
Ultra low inductance
Ultra high speed
Super low noise
Ultimate dynamic contrast
12 gauge solid core construction
This ultimate power cord from Chang provides state of the art performance for video and audio lovers.
Call or e-mail for prices!